It was recently learned that GB 7258-2017 will be used instead of GB 7258-2012 and will be implemented on January 1, 2018. The full name of GB 7258 is "technical conditions for the operation of motor vehicles", which is jointly issued by aqsiq and the national standardization administration. All technical content of this standard is mandatory, drafted according to the rules given in GB/T 1.1-2009. This standard applies to all motor vehicles in our country roads, including traditional gasoline and diesel passenger vehicles, pure electric vehicles, buses, school buses, trucks and living in a car, but not including special mechanical cars trolley and wheel. All media reporters read the standard and found that compared with the 2012 edition, the new standard adjusted and modified more than 150 items. Among them, there are some standards that are closely related to the owners, listed for reference. It needs to be explained that the adjustment of the new standard has a transitional period, and some of the criteria are postponed for 13 months, 25 months and 37 months. Among all the standards, the most important one should be: the electric window should be equipped with the anti-clamping function, the factory standard that can not be hung with the vehicle brand, and the car should be equipped with a reflective vest.

Mandatory standard with reflective vest, power window clamp.

In addition to the inspection of the triangle warning frame, the number of reflective vests will be checked at the same time, because this is the new standard requirement. At the same time, the car Windows should be equipped with a clamping function, including electric Windows. All passenger cars and special school buses are required for normal use when the vehicle is locked. When children are left in the car, they can be told by honking their horn.

The suspension of the vehicle logo should be in line with the brand.

The new standard increases the expression "fit with the vehicle brand". I bought other vendors' logos on the Internet to hang, not only the annual inspection, but also the traffic police on the road to write a ticket. Note that it is also not permissible to have a more decorative personality around the logo and factory logo.

The rv can't be overloaded.

The new standard is the definition of a new vehicle, that is, equipped with sleeping gear (which can be converted from tables and chairs) and other necessary living facilities for traveling and camping cars. At the official level, recognition is given to regular RVS. At the same time, the new standard has approved the number of people in the rv, eliminating the possibility of overload. The new standard also requires that the passenger car should have a power supply switch and a leakage protection facility; In addition to the starter motor, ignition circuit, battery and charging circuit, all other circuits should be equipped with circuit breaker, and low power appliances can set the utility circuit breaker.

Pure electric vehicles should start with a sound warning.

The new standard will be pure electric vehicle, plug-in hybrid and other new energy vehicles single column, driving safety, driving performance of technical requirements. Among them, when the vehicle starts and the vehicle speed is less than 20km/h, it should be able to make a proper suggestion for the outside personnel. When a vehicle has a leak, it should be prompted by an obvious signal device. At the same time, the vehicle should be able to cut off the power circuit to avoid secondary traffic accidents.

All seats should be fitted with a three-point seat belt.

In order to save costs, some passenger car seats in the middle of the rear are provided with a simple two-point seat belt. In the new standard, this will not meet the requirements. All seats in the passenger car must be provided with a three-point seat belt.

Let drive at the same time, so as to realize the playback, improve the traceability of traffic accidents, all passenger vehicles should be equipped with can record the collision of a specific event occurs data such as vehicle speed, braking state information of the event data recording system (EDR), or are equipped with conform to the standards prescribed by the on-board video recording device.